Semiconductor
Processing Equipment
Air Conditioning &
Refrigeration
New sealing method for high-volume applications allows for increased conductor density with decreased size
(RANDOLPH, N.J.: June 17, 2009) Douglas Electrical Components (DECo) launches a new solution for hermetically sealing a variety of circuit board styles, including flex, rigid and hybrid circuits. Ideal for high-volume applications with certain space constraints or weight requirements, hermetically sealed circuit boards allow for increased conductor density, while providing a smaller, lighter and less expensive solution.
"The ability to hermetically seal circuit boards is extremely useful for projects that call for complex computations" says Ed Douglas, president of DECo. "These solutions are particularly significant in applications that require incredibly compact and low-weight sealing methods, such as in missiles or bomb fuses."
Traditionally, seals are made to discrete wires and then connected or directly wired to a circuit board, using valuable space and numerous individual wire seals. By sealing directly to the circuit as opposed to each wire, the DECo solution can either drastically increase the number of conductors used in the same size housing or reduce the size of the housing for the same conductor count. This method also takes advantage of the low-cost circuit board manufacturing process, in turn making the solution more cost-effective than an equivalent wire feedthrough. Additionally, by sealing directly to the circuit board, electrical connection points can be eliminated, which minimizes voltage drops and any associated labor needed to make and test the wire-to-circuit connection point.
DECo seals a variety of circuit combinations, including rigid, flex and hybrid, as well as flat flex cable (FFC). FFC offers the same size and cost advantages of the rigid and flex circuit seals, but they are available off the shelf from a variety of electrical distributors, which makes them ideal for small quantity production runs or R&D efforts. Regardless of the combination of circuits or cables used, DECo can provide a custom engineered solution based on project needs, which can range from the number of conductors required to space constraints.
In addition to application in military and defense engineering, laser equipment and space simulation, the DECo circuit sealing method is also designed for use in semiconductor manufacturing and systems using magnetic bearings.
For more information, visit http://www.douglaselectrical.com.
For sales and marketing information, contact Cindi Telep, director of customer relations, DECo, by phone at (973) 627 8230, or by e-mail at ctelep@douglaselectrical.com.
For media information, contact Samantha Devine, public relations, Koroberi, Inc. (www.koroberi.com) by phone at (919) 945 0566, or by e-mail at samantha@koroberi.com.
Founded in 1945, Douglas Electrical Components, Inc. (DECo) is a third generation, family-owned company that pioneered the development and practical application of epoxy technology to electrical wire feedthroughs. DECo offers proven solutions and works with customers to develop high quality products for their conductor sealing needs.
DECo is an ISO 9001 registered manufacturer of UL-approved electrical and fiber optic feedthroughs, hermetically sealed connectors and cables, explosion proof wire assemblies and turnkey subassemblies for semiconductor manufacturing equipment. Major markets served include automotive, magnetic bearing, power generation and distribution, semiconductor processing, space simulation, military, alternative energy, air conditioning and refrigeration, X-ray, explosion-proof, oil and gas exploration, and glovebox.
Customized connector seals allow for easy specification and mounting
(RANDOLPH, N.J.: May 20, 2009) Douglas Electrical Components (DECo) introduces its StudSeal™ hermetic feedthrough product family, which offers a selection of solid copper, heavy-current conductors sealed in a wide variety of standard housing styles and materials. The stud connectors from this line are used in vacuum or pressure applications where high current or high voltages penetrate a barrier. The customized passthroughs offer easy specification and mounting and are pretested and shipped to the customer directly.
StudSeal feedthroughs can seal high-pressure or high-vacuum environments, and are compatible with a large variety of liquids and gases including the latest refrigerants, oils, heat transfer fluids and jet fuels. These hermetically sealed studs are primarily used for the transfer of power into and out of a sealed environment at operational loads up to 1000amps and 15kV.
Offering a variety of configurations, StudSeals typically consist of a threaded rod on both sides of the hermetic seal. Other standard and custom solutions are also available, such as crimp fittings, terminal-to-wire solutions occurring inside of the epoxy and compression fittings, where the wire compresses against the stud itself via a threaded set screw. DECo also offers multi-stud configurations that not only reduce installation time and potential leak paths, but also reduce the burden on purchasing departments. These multi-stud designs seal terminals directly into a bulkhead plate for transfer of three-phase or for six-phase power.
"It is vital to your project to specify the proper feedthrough, since mistakes can derail completion and potentially lead to critical occurrences," says Ed Douglas, president of DECo. "Power transfer solutions configured in-house can sometimes cause serious malfunctions, such as venting, which result in a major failure point. Our technical experts add value by designing around these issues to prevent potentially dangerous incidents."
DECo can seal virtually any size or style stud in a housing of the customer's choice, from low volume R&D quantities to hundreds of thousands per year. While similar industry feedthroughs typically only offer threaded metal housing solutions, DECo can provide epoxy-based radial o-ring solutions that don't require threading, resulting in increased value through faster installation at a lower cost.
The StudSeal feedthroughs are widely used in air conditioning and refrigeration compressors, vacuum furnaces, and power distribution equipment. Specifically, these solutions are found in transformers, hermetically sealed compressors, pumps, magnetic bearing flywheels and heater circuits.
For more information, visit http://www.douglaselectrical.com.
For sales and marketing information, contact Cindi Telep, director of customer relations, DECo, by phone at (973) 627 8230, or by e-mail at ctelep@douglaselectrical.com.
For media information, contact Emily Fuleihan, public relations, Koroberi, Inc. (www.koroberi.com) by phone at (919) 945 0552, or by e-mail at emily@koroberi.com.
About Douglas Electrical Components
Founded in 1945, Douglas Electrical Components, Inc. (DECo) is a third generation, family-owned company that pioneered the development and practical application of epoxy technology to electrical wire feedthroughs. DECo offers proven solutions and works with customers to develop high quality products for their conductor sealing needs.
DECo is an ISO 9001 registered manufacturer of UL- approved electrical and fiber optic feedthroughs, hermetically sealed connectors and cables, explosion proof wire assemblies and turnkey subassemblies for semiconductor manufacturing equipment. Major markets served include automotive, magnetic bearing, power generation and distribution, semiconductor processing, space simulation, military, alternative energy, air conditioning and refrigeration, X-ray, explosion- proof, oil and gas explorationplorati
Customized potted passthroughs offer pin-to-socket configurations for regular mating
(RANDOLPH, N.J.: April 16, 2009) Douglas Electrical Components (DECo) introduces its PotCon™ line of hermetic feedthroughs, which incorporate standard connectors and/or wire harnesses in a single, fully-sealed housing. The PotCon product family features disconnectable circuits at the pressure bulkhead or vacuum port plate, which allow for easy mating and unmating.
DECo manufactures over one thousand different varieties of PotCon connectors for vacuum, pressure and environmental containment. These feedthroughs are capable of the standard pin-to-pin or socket-to-socket configurations, but also offer a unique pin-to-socket design. This feature allows for easy bench top testing. Another unique feature offered by the PotCon line is the connector-to-wire configuration, which is available in addition to standard connector-to-connector and connector-to-solder cup designs.
"By providing a mated solution that uses the same connection in the vacuum chamber as on the bench, the PotCon feedthroughs facilitate bench top testing prior to installation in the vacuum chamber, minimizing the risk of project failures that may arise," said Ed Douglas, president of DECo. "In vacuum chamber applications, regular mating and unmating is common, and a typical wire harness solution makes that operation very cumbersome. With the PotCon connectors, customers can do dry run testing through the same connections without having the vacuum bulkhead present. This also saves undue wear on the actual installed wiring into the chamber, which can stay intact."
PotCon feedthroughs may be specified and sealed to the housing for reliable mounting. The sealing technology employed allows customers to specify virtually any connector from any manufacturer and have it sealed in either a custom or standard fitting of their choosing. Pre-tested, vacuum outgassed and ready to install, PotCon solutions can seal a variety of connectors, including Mil-C series, circular plastic, sub-D (including standard density and micro-D), coaxial, waterproof, thermocouple, high-current and high-voltage.
PotCon feedthroughs are most often used in space simulation, semiconductor manufacturing and glovebox applications. Testing conducted on these feedthroughs and optional mating connector/cable sets includes Helium Mass Spectrometry Leak Detection to an allowable leak rate of 1.0 x 10^-10 sccm He/second, electrical hi-pot tests up to 30KV and electrical continuity.
For more information, visit http://www.douglaselectrical.com.
For sales and marketing information, contact Cindi Telep, director of customer relations, DECo, by phone at (973) 627 8230, or by e-mail at ctelep@douglaselectrical.com.
For media information, contact Emily Fuleihan, public relations, Koroberi, Inc. (www.koroberi.com) by phone at (919) 945 0552, or by e-mail at emily@koroberi.com.
About Douglas Electrical Components
Founded in 1945, Douglas Electrical Components, Inc. (DECo) is a third generation, family-owned company that pioneered the development and practical application of epoxy technology to electrical wire feedthroughs. DECo offers proven solutions and works with customers to develop high quality products for their conductor sealing needs.
DECo is an ISO 9001 registered manufacturer of UL- approved electrical and fiber optic feedthroughs, hermetically sealed connectors and cables, explosion proof wire assemblies and turnkey subassemblies for semiconductor manufacturing equipment. Major markets served include automotive, magnetic bearing, power generation and distribution, semiconductor processing, space simulation, military, alternative energy, air conditioning and refrigeration, X-ray, explosion- proof, oil and gas exploration, and glovebox.
March 11, 2009
Customized multiple feedthrough plates reduce time and costs associated with assembly and repairs
(RANDOLPH, N.J.: March 11, 2009) Douglas Electrical Components (DECo) introduces its Portplate systems, which combine fully assembled, pre-tested multiple feedthroughs on a single plate. The custom-designed and fabricated port plate assemblies minimize the amount of potential downtime due to system leaks, which would usually result in high costs and delays, associated with troubleshooting. The DECo-pioneered port plates can hold multiple sealed feedthroughs, depending on the project needs, and can be replaced as one unit, should leakage occur.
Customers benefit from the full range of service provided with these assemblies, including design, mounting, testing, installation, mating connectors, troubleshooting and full connectorization on the wire harness. The finished, ready-to-pump feedthrough plates are available to accommodate a variety of mixed configurations of feedthroughs including those from the DECo Ductorseal®, Studseal™, Optiseal™ and Potcon™ product families. The plates can house a variety of connector densities and counts, as well as mating connectors, and ready-to-go, fiber optic bulkheads.
"DECo Portplate assemblies add value to customers by eliminating the need for engineers to build and troubleshoot the harness," says Ed Douglas, president of DECo. "We take care of everything throughout the process, saving cost for customers who may not have the time, tools or knowledge to assemble the systems in-house."
"The Portplate assemblies also minimize time and costs associated with troubleshooting by minimizing multiple potential leak paths to a single leak point, the plate assembly," adds Douglas. "Unavoidable system leaks could pollute the vacuum environment and the product within it, causing project failure. The high cost of downtime associated with these leaks is another important consideration, as the chamber is not only unavailable while engineers and technicians troubleshoot the problem, but late delivery fees or contract penalties can also result."
The assemblies are available in various sizes ranging from 6" through 48" in diameter and offer full strain relief. They can be provided with or without connectors, and are shipped to customer facilities as a complete assembly, ready to install and pump. DECo also offers vacuum outgassing bakeout for components or the entire unit. Common applications for these systems include space simulation, HVAC compressors, magnetic bearing flywheels, semiconductor manufacturing equipment and mass spectrometry.
For more information, visit http://www.douglaselectrical.com.
For sales and marketing information, contact Cindi Telep, director of customer relations, DECo, by phone at (973) 627 8230, or by e-mail at ctelep@douglaselectrical.com.
For media information, contact Emily Fuleihan, public relations, Koroberi, Inc. (www.koroberi.com) by phone at (919) 945 0552, or by e-mail at emily@koroberi.com.
About Douglas Electrical Components
Founded in 1945, Douglas Electrical Components, Inc. (DECo) is a third generation, family-owned company that pioneered the development and practical application of epoxy technology to electrical wire feedthroughs.
DECo offers proven solutions and works with customers to develop high quality products for their conductor sealing needs.
DECo is an ISO 9001 registered manufacturer of UL- approved electrical and fiber optic feedthroughs, hermetically sealed connectors and cables, explosion proof wire assemblies and turnkey subassemblies for semiconductor manufacturing equipment. Major markets served include automotive, magnetic bearing, power generation and distribution, semiconductor processing, space simulation, military, alternative energy, air conditioning and refrigeration, X-ray, explosion- proof, oil and gas exploration, and glovebox.
January 15, 2009
Ductorseal® sealed wire and cable assemblies solve through-bulkhead conductor sealing problems by providing an interconnecting harness in a fully sealed, pre-wired, pre-tested and ready-to-install hermetic feedthrough.
(RANDOLPH, N.J.: January 15, 2009) Douglas Electrical Components (DECo) introduces its Ductorseal® feedthrough product line, which features precision-machined housings of aluminum, titanium, steel, brass, plastic or low out-gassing epoxy, and are available with a variety of standard or custom wire bundles, including AWG #38 through 500 MCM wires, cables and harnesses in virtually any length. They are epoxy-sealed to provide leak-free performance in a range of operating environments, from 1x10-10 Torr through 15,000 psi, and from 4 K (LHe) through 200°C. High voltage and low cross-section wire feedthroughs operating up to 30kV-DC are also available.
Conductor counts range from single wires through 3,200 or more wires. Connector configurations on both atmospheric and vacuum/pressure sides can be mixed and matched as needed. Ductorseal feedthroughs are widely used in applications ranging from automotive, semiconductor manufacturing, space simulation, military, and alternative energy, to air conditioning and refrigeration, X-ray, explosion-proof, oil and gas exploration, and glovebox.
DECo designs and manufactures feedthroughs, sealed cables, hermetic seals, sealed connectors, fiber optic seals, bulkhead connectors, coaxial connectors, ceramic feedthroughs, hermetically sealed connectors, electrical feedthroughs, vacuum feedthroughs and waterproof connectors. DECo can hermetically seal any conductor, including wires, cables, harnesses and fiber optics, through any housing, and to any leak rate and sealing level standard, including IP, NEMA and Military MTD-STD-810. The company also supplies value-added subassemblies, including transducers, sensors, switches, heaters, connectors, flex circuits, ribbon cables, thermocouples, fiber optics and other discreet components. Utilizing customer furnished or sourced materials, sub-assemblies are pre-tested, documented and ready to install.
For more information, visit http://www.douglaselectrical.com.
For sales and marketing information, contact Cindi Telep, director of customer relations, DECo, by phone at (973) 627 8230, or by e-mail at ctelep@douglaselectrical.com.
For media information, contact Kathryn Olive, public relations, Koroberi, Inc. (www.koroberi.com) by phone at (919) 945 0563, or by e-mail at kathryn@koroberi.com.
About Douglas Electrical Components
Founded in 1945, Douglas Electrical Components, Inc. (DECo) is a third generation, family-owned company that pioneered the development and practical application of epoxy technology to electrical wire feedthroughs.
DECo offers proven solutions and works with customers to develop high quality products for their conductor sealing needs.
DECo is an ISO 9001 registered manufacturer of UL- approved electrical and fiber optic feedthroughs, hermetically sealed connectors and cables, explosion proof wire assemblies and turnkey subassemblies for semiconductor manufacturing equipment. Major markets served include automotive, magnetic bearing, power generation and distribution, semiconductor processing, space simulation, military, alternative energy, air conditioning and refrigeration, X-ray, explosion- proof, oil and gas exploration, and glovebox.
December 11, 2008
Douglas Electrical Components Expands Operations in Response to Business Growth
Larger facility is part of company's lean transformation, answering increased Just-in-Time demands
Douglas Electrical Components, Inc. (DECo), a leading manufacturer of standard and custom electrical components for specialized industrial applications, recently moved all of its manufacturing and support functions to a new, expanded facility in Randolph, New Jersey. The expansion comes in response to significant growth in business operations and demand, specifically for hermetic feedthroughs used in magnetic bearing solutions including HVAC compressor, turbo-machinery and carbon-fiber flywheel applications, as well as in demand for green and alternative energy applications. The company increased its operating space from approximately 12,000 square feet to 30,000 square feet, after reaching maximum capacity at its previous location in Rockaway, New Jersey.
The new facility houses all aspects of DECo's business, from manufacturing to warehousing to corporate management. In addition to a response to increased demand, the move comes as part of a Lean transformation, allowing DECo to provide Just-in-Time (JIT) delivery of production assemblies.
"More than 65 percent of our products are shipped on a Just-in-Time basis to our customers," said Ed Douglas, president of DECo. "Over the next five to seven years, we expect our business to grow by 100 percent to 150 percent, and our new facility allows us to meet this demand by improving our manufacturing, warehousing and operations capabilities while reducing in-process inventory and maximizing overall efficiency."
The new facility is also representative of an "onshoring" trend, in which companies look for products made in the USA to minimize inventory, increase supply chain reliability and ensure quick turnaround on orders. "In the critical applications where our products are used, DECo customers are simply not prepared to risk engineering failure or delivery compromises with overseas sourcing," said Douglas. "Our ability to provide on-time custom-engineered assemblies while maintaining total quality control is a key element of our growth."
DECo specializes in hermetically sealed wire and cable assemblies, connectors, studs/motor terminals and unique feedthroughs for a variety of applications including semiconductor processing, X-ray, magnetic bearing, oil and gas exploration, power generation and distribution, space simulation, air conditioning and refrigeration, vacuum systems, automotive, military, alternative energy, explosion proof, and glovebox (decontamination and medial) equipment.
For sales and marketing information, contact Cindi Telep, director of customer relations, DECo, by phone at (973) 627 8230, or by e-mail at ctelep@douglaselectrical.com.
For media information, contact Kathryn Olive, public relations, Koroberi, Inc., by phone at (919) 945 0563, or by e-mail at kathryn@koroberi.com.
About Douglas Electrical Components, Inc.
Founded in 1945, Douglas Electrical Components, Inc. (DECo) is a third generation, family-owned company that pioneered the development and practical application of epoxy technology to electrical wire feedthroughs. DECo offers proven solutions and works with customers to develop high quality products for their conductor sealing needs.
DECo is an ISO 9001 registered manufacturer of electrical and fiber optic feedthroughs, hermetically sealed connectors and cables, explosion proof wire assemblies and turn-key subassemblies for semiconductor manufacturing equipment. Major markets served include automotive, magnetic bearing, power generation and distribution, semiconductor processing, space simulation, military, alternative energy, air conditioning and refrigeration, X-ray, explosion proof, oil and gas exploration, and glovebox.
Douglas Electrical Components, Inc. (DECo) today announced that it expects to complete its transition of all manufacturing and support functions to the company's new facility located at 5 Middlebury Boulevard in Randolph, New Jersey by the end of March. The building was recently approved for occupancy and final facilities improvements are currently being completed. The new facility increases the company's manufacturing space from approximately 6,000 sf to now over 16,000 sf. When the move is complete, DECo will cease all operations at the Rockaway, New Jersey facility. All of the email addresses and telephone numbers for the company will be ported to the new facility.
Douglas Electrical Components is an ISO 9001 registered manufacturer of electrical feedthroughs, fiber optic feedthrus, hermetically sealed connectors and cables, explosion proof wire assemblies and turn-key subassemblies for semiconductor manufacturing equipment. Major markets include automotive, power distribution and transmission, semiconductor manufacturing equipment, space simulation chambers, military/aerospace, air conditioning and refrigeration compressors, x-ray and medical equipment, and instrumentation and control systems. Over 65% of DECo's products are shipped on a just-in-time basis to demanding customers throughout the world.
For further information please contact Cindi Telep, Customer Service Manager, at 973-627-8230.
In a significant move in the company's continuing initiative to convert the business to a world class manufacturing organization, Douglas Electrical Components, Inc. (DECo) today announced that it has finalized contracts to move its operations in entirety to a new facility currently being constructed in Randolph, New Jersey. The new facility will more than double the company's overall space, and more than triple the available manufacturing floor space. With the addition of the new key operations management personnel announced in February, the company is now positioned to open the new facility with several key quality system registrations in place and with a lean manufacturing philosophy fully implemented. It is expected that the new facility will begin operations in the 4th quarter of 2007.
Douglas Electrical Components is an ISO 9001 registered manufacturer of electrical feedthroughs, fiber optic feedthrus, hermetically sealed connectors and cables, explosion proof wire assemblies and turn-key subassemblies for semiconductor manufacturing equipment. Major markets include automotive, power distribution and transmission, semiconductor manufacturing equipment, space simulation chambers, military/aerospace, air conditioning and refrigeration compressors, x-ray and medical equipment, and instrumentation and control systems. Over 65% of DECo's products are shipped on a just-in-time basis to demanding customers throughout the world.
As a continuing part of Douglas Electrical Components, Inc. (DECo) drive towards implementing lean, world class manufacturing operations, the company today announced the addition of Robert Della Torre, Quality Manager, to the management team. In this new role, Mr. Della Torre will have complete responsibility for all Quality System related issues throughout the organization. Mr. Della Torre brings over 15 years of quality and operations experience in manufacturing, including extensive lean manufacturing, kaizen, 5S and ISO 9000 exposure.
Douglas Electrical Components is an ISO 9001 registered manufacturer of electrical feedthroughs, fiber optic feedthrus, hermetically sealed connectors and cables, explosion proof wire assemblies and turn-key subassemblies for semiconductor manufacturing equipment. Major markets include automotive, power distribution and transmission, semiconductor manufacturing equipment, space simulation chambers, military/aerospace, air conditioning and refrigeration compressors, x-ray and medical equipment, and instrumentation and control systems. Over 65% of DECo's products are shipped on a just-in-time basis to demanding customers throughout the world.
As part of Douglas Electrical Components, Inc. (DECo) drive towards implementing lean, world class manufacturing operations, the company today announced the addition of Karl Thorndike, COO, to the management team. In this new role, Mr. Thorndike will have complete responsibility for all manufacturing, facilities and materials management for the company and will spear-head the implementation of the modern manufacturing philosophies throughout the organization. Karl brings over 30 years of manufacturing and operations management experience, the majority of which was spent in senior management positions, converting manufacturing companies from department based manufacturing operations to lean, cell based facilities.
Douglas Electrical Components is an ISO 9001 registered manufacturer of electrical feedthroughs, fiber optic feedthrus, hermetically sealed connectors and cables, explosion proof wire assemblies and turn-key subassemblies for semiconductor manufacturing equipment. Major markets include automotive, power distribution and transmission, semiconductor manufacturing equipment, space simulation chambers, military/aerospace, air conditioning and refrigeration compressors, x-ray and medical equipment, and instrumentation and control systems. Over 65% of DECo's products are shipped on a just-in-time basis to demanding customers throughout the world.
In response to the increasing demand for its products, Douglas Electrical Components, Inc. (DECo) announced today that it has developed plans for a dramatic expansion of its manufacturing facilities with an eye towards the utilization of lean manufacturing techniques. It is anticipated that new facilities will incorporate an enhanced quality system that will be compliant with various quality system standards, including NQA-1 and TS-16959, so as to provide DECo's broad array of customers even higher levels of product quality and service. It is expected that with this expansion, DECo will make significant and meaningful additions to the management team.
Douglas Electrical Components is an ISO 9001 registered manufacturer of electrical feedthroughs, fiber optic feedthrus, hermetically sealed connectors and cables, explosion proof wire assemblies and turn-key subassemblies for semiconductor manufacturing equipment. Major markets include automotive, power distribution and transmission, semiconductor manufacturing equipment, space simulation chambers, military/aerospace, air conditioning and refrigeration compressors, x-ray and medical equipment, and instrumentation and control systems. Over 65% of DECo's products are shipped on a just-in-time basis to demanding customers throughout the world.
Sealing gland assemblies, offering reliable barriers to permit continuous feed-through of wire and probe seals, are now offered by Douglas Electrical Components. "Glandseal," which derives its name from the easily field-replaceable Teflonâ glands, seals pressures from vacuum up to 10,000 psi, (690 BAR), and operates in extreme temperatures.
Numerous applications include pumps, sensors/transducers, semi-conductor manufacturing, gloveboxes, data logging, maritime equipment, food processing, fiberoptics, environmental seals, vacuum & hermetic containment and other uses. The units accommodate 1 to 12 leads or 8 to 24 AWG. Custom Glandseals are available for special applications. Contact Douglas Electrical Components, PO Box 645, Rockaway, NJ 07866. 800.533.8068, fax 866.206.6916, E-mail info@douglaselectrical.com.
New Development in Feedthru Technology Incorporates High Temperature Ceramic Potting Compound to Seal Connectors, Wires, Cables, and Fiber Optics for applications up to 500ºF
Pledging their commitment to continually improving their processes and quality, ISO certification ensures customers that DEC strives to consistently meet the highest standards in design, production, and attention to customer requirements. The prime responsibility for all of our employees is to deliver a quality product that meets or exceeds our customers’ requirements in a timely manner.
The scope of the DEC ISO 9001:2000 Certification is “The Design and Manufacture of Electrical, Electronic, and Fiber Optic Feedthrus,” states Ms. Cindi Telep, Management Representative, Corporate Quality Assurance. For further information, please contact us at 973.627.8230 or e-mail at ctelep@douglaselectrical.com.
